1. Germany Berg The layout of the air compressor is clear and clear, which is divided into electrical and transmission parts, compression parts and cooling parts. The structure is compact and easy to overhaul all components. Germany Berg The structural features of the air compressor are as follows:
1. Electrical and transmission parts
BOGE air compressor The motor, electric cabinet and intake filter are placed in the coldest area of the system. The protection level of the motor and electric cabinet is at least IP54, and is continuously cooled to ensure that each component has the longest service life. This increases the efficiency of the compressor. Using the coolest inlet air, the BOGE air compressor ensures that the highest quality compressed air is delivered to the user.
2. Compression part
The main part of the BOGE air compressor is compact and easy to maintain. The multifunctional intake controller and horizontal oil and gas sharing cylinder and external rotary fine oil and gas separator. Berg The air compressor head adopts flange connection mode directly connected with the oil gas separation cylinder, the whole parts are placed on the shock proof base, the head and the oil separation kit directly connected by the flange are avoided, and the hose and the oil gas separation cylinder are mutually connected.
3. Cooling part
The BOGE air compressor independent fan and cooler are installed on the top of the whole system, and the cooling air is discharged to the outside by forced circulation. To maintain the smart design of the cover plate, the cleaning cooler is very easy and no need to be dismantled.
Two, the German BOGE air compressor S180 adopts BOGE's carefully designed screw main engine, and the BOGE132KW air compressor also has the following advantages:
1, the whole oil circuit cycle does not need to cut off the oil solenoid valve and one-way valve, high operational reliability.
2. The ultra quiet standard of air intake, comfortable voice level, easy to upgrade to full mute.
3. BOGE control, regulation and monitoring system, unique, practical, economical and reliable.
4. Very reliable dynamic air intake controller, which is a standard design component, can be used for air conditioning control.
5, high toughness, high strength sealed chassis, easy to use forklifts and palletizing trucks for transportation.
6, anti vibration sub base, reduce the transmission of structural noise.
7, the installation of a sound insulation board, inside the box mounted nylon nylon sound absorbing material, good sound insulation effect, leak proof oil can be washed.
8. Compact belt device and belt guard cover prevent dust and dirt from entering.
Berg S180 screw compressor Main technical parameters
| Model|| S180|
| [m /min]|| Twenty-four point four seven|| Twenty-one point eight four|| Eighteen point six nine|
| Exhaust pressure [bar]|| Eight|| Ten|| Thirteen|
| Power [V/ph/Hz]|| 380/3/50|
| Main motor power [KW/HP]|| 132/180|
| Outline size W*D*H[mm]|| 2265*1585*2005|
| Unit weight [kg]|| Three thousand and four hundred|
| Outlet diameter|| DN80|